Removes bearings without damaging wheels, you will be able to remove bearings in seconds with this tool
Works on virtually any sized motorcycle or ATV wheel bearing – Safe and Easy
The set consists of 7 removers-25mm, 20mm, 19mm, 17mm, 15mm, 12mm and 10mm; Plus 2 rods to fit all bearing sizes with storage case
The hair pulling task of removing wheel bearings has been made easier!
Removes bearings without damaging wheels.
Works on virtually any sized motorcycle or ATV wheel bearing.
Safe and easy.
The set consists of 7 removers-25mm, 20mm, 19mm, 17mm, 15mm, 12mm and 10mm; Plus 2 rods to fit all bearing sizes with storage case.
Each remover has a tapered end so part of the remover will slip inside the bearing…simply put the proper size remover in the bearing, then flip wheel & bearing over so the remover is against the floor. Next take the rod tool and insert into remover and tap firmly into place (the remover has a slot in it for the rod tool to slide into). Once you have the rod firmly in place simply lift the wheel and bearing off the ground and tap again and the bearing will fall out. When the remover is against the ground and taped on, it is spread apart tight against the bearing, then when you lift off the ground and tap, it pushes the bearing out of the race. You will be able to remove bearings in seconds with this tool.
Manufacturer offers lifetime warranty on this tool.
