Charger, Maintainer & Desulfator: – An all-weather battery charger, battery maintainer, trickle charger, and battery desulfator. Perfect for charging and maintaining all 12-volt lead-acid, flooded or sealed maintenance free batteries (AGM and gel cell). ETL safety standard Listed.
Automatic Desulfation & Optimization: – Automatic detection of battery sulfation problem. Applying with pulse current technology to desulfate the batteries effectively. Optimize the battery performance during charging without any manual operation.
Energy Saving & Spark Free: – Zero output in standby mode. No battery drain when connecting with the battery. Spark proof during lead connection for safety.
ETL/UL Certified, Multi-level Safety Protection & Timer Set Up: – ETL safety certified. Overcharge, short circuit and reverse polarity protected. Charge the battery up to 14.4V and Maintain the battery at 13.6V for long time to avoid gasing and to extend the battery life. 24-hour Timer is set up in the program to terminate the charge and enter the maintaining mode once the voltage is above 14V to ensure safety.
Easy Operation: -Just plug-in, connect to the battery and start charging or maintaining your battery. The desulfation is working automatically during the charing. No manual operation.
Warranty: – 2 Year Warranty AND 100% SATISFACTION SERVICE. If you are not pleased with the product, please contact motopower directly for hassle-free return and refund. Save your bucks and time. ,MOTOPOWER is the registered brand of MOTOPOWER INC. We are the direct factory specializing in the eletrical products and accessories for automotive and powersports industry, such as battery chargers, battery testers, cell phone chargers, cables and more. All the products are designed, produced and sold directly by MOTOPOWER. We control all the progress from the very beginning material purchase to the final shipment to customers, so as to ensure the products quality and the customer satisfactory. You can get the best products here at the most competitive cost directly from MOTOPOWER stores on Amazon.
Charge and Maintain all types of 12V lead-acid batteries
Low-Voltage Activation & Recovery
Pulse current applied for batteries between 4 – 8volts. Increase the battery voltage gradually to optimize the cells and restore their best performance.
Absorption Mode
Force pulse current in the absorption stage to desulfate the cells. Removing the troublesome crystals and absorb into the charge cycle.
Maintain at 13.6volts Indefinitely
Maintain the battery with float current close to 0.1 – 0.5amp and keep the battery at 13.6V+/-0.2V indefinitely. Restart charging when voltage drops.
Charging Stages
Five CHARGING STAGES – Diagnosis, Soft Start, Bulk Charge, Absorption and Float/Maintenance. Bring the batteries to back to life.
Benefits and Features – The best choice for your batteries
Energy-Save & Safety
No output without load. No battery drain when connecting with battery. Spark free for safety.
Recondition Batteries
Sulfation detection and repair cells damage. Optimize the battery chemistries.
Thermal Compensation
Stable performance for any climate. Low temperature activation.
Timer Protection
24-hour absorption/desulfation. Stop automatically when fully charged or when time’s up.
Direct Factory Source from MOTOPOWER Factory – Quality Ensured & Cost Effective
Best Choice for Motorcycles, ATVs, Scooters, and Automobiles.
Product Features:
The MOTOPOWER MP00205A 12V 800mA Battery Charger allows you to connect the charger to the battery and leave it for maintenance indefinitely.
Once the battery has reached a 100% charge, the chargers will automatically switch it’s output voltage to a safe, storage/float level (13.6V+/-0.2V) that eliminates the need to worry about the damaging effects of overcharging.
Pulse Current Recovery Mode:
In the Absorption Mode, the charger will give a 0.5Amp pulse current to charge and recover the battery until it’s fully charged. In this stage, the charger will decrease the battery sulfation and improve the battery performance gradually. For several times charging, you will find the battery internal resistance is lower and the performance is improved.
Technical Details:
– Input Voltage: 100-240V AC / 60Hz.
– Output Voltage: 12 Volts DC @ 800mA
– Charged Voltage: 14.2+/-0.2 Volts
– Maintenance Voltage: 13.6+/-0.2 Volts
– Activate Voltage: 4Volts ( Do not suggest charging dead batteries )
Package Includes:
– Battery Charger x 1
– SAE Alligator Clamp Cable x 1
– SAE Eyelet Terminal Cable(7.5A fused) x 1
– Instruction Manual x 1
MP00205A 12V 800mA [Junior]
MP00205C 12V 800mA [Junior Plus]
MP00206A 12V 1.5Amp [Senior]
MP00207A 12V 2Amp [Advanced]
MP00207 6V / 12V 4AMP [Intelligent]
MP00205B 12V 1000mA [Optimizer X]
Battery Voltage
12V
12V
12V
12V
6V & 12V
12V
Charging Current
800mA
800mA
1.5Amp
2Amp
2Amp & 4Amp
1Amp
Maintenance Mode
?
?
?
?
?
?
Charging Stages
4
4
4
4
7
5
Overcharge Protection
?
?
?
?
?
?
Short Circuit Protection
?
?
?
?
?
?
Reverse Polarity Protection
?
?
?
?
?
?
Spark-proof
?
?
?
?
?
?
Battery Repair
Pulse current recovery
Pulse current recovery
Pulse current recovery
Pulse current recovery
Repair Mode
Pulse current recovery
Menu
